H-SILICONE White
Product description
One-component, flexible sealant H-SILICONE Transparent gives highly durable and flexible joints resistant to water, oils, acids and alkalis. It has very good adhesion to most materials and surfaces common in the construction industry: glass, tile, terracotta, ceramics, and secured metals. The joint is durable, completely resistant to changing weather conditions and UV radiation. Available also in white colour (H-SILICONE White).
USAGE / EXAMPLE OF USE
- window glazing
- glazing of greenhouses
- sealing partition wall
- sealing window and door frames
TECHNICAL DATA & SUITABLE WORKING CONDITIONS
Parameter | Value |
Appearance | Pasty |
Type of curing | Acetate |
Colour | Transparent, White |
Processing time | approx. 25 min |
Time of the full hardering by relative 55% humidity | 2mm/24 hrs |
Application´s time (use) | from +5 to +40°C |
Thermal resistance (cured product) | from -40 to +180°C |
The transverse elastic modulus 23°C according to ISO 8339 | 0,36 N/mm2 |
Shore A Hardness | 18 Sh A |
Density | 0,98 – 1,05 g/cm3 |
Elongation at break according to ISO 8339 | 150 % |
Efficiency | Approx. 18m of weld size 4x4mm is obtained from the cartridge 310 ml |
APPLICATION / HANDLING
The surface, which is to be applied H-SILICONE Transparent, should be clean and free of dust, dirt, oil, grease, rust and other substances that impair adhesion. Silicone does not require a primer, but on the specific surfaces there may be a need to use a primer.
Prior to silicone application the rim should be secured with masking tape. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator at the thread, cut at an angle adjusted to the width of the joint. Apply with a manual or pneumatic gun. Silicone can be smoothed with a spatula for silicone spreading that is dampened in a solution of soap. Use tools from plastic or stainless steel.
Silicone is cured by reaction with moisture from the air, therefore, the seal should be performed under conditions that allow access of air. Washing of cured sealant with commercially available cleaning agents prolongs the lifespan.
CLEANING
After use, wipe the tools with a paper towel and clean with solvent.
PRECAUTIONS FOR SAFE USING
Please consider the material safety data sheet of the product prior to handling.
STORAGE
Store in original packaging in a dry and cool place for a period of 18 months from the production date at temperatures from 5 up to 35°C. Protect from freezing temperatures! Keep out of the reach of children!
TRANSPORT
Information concerning safety and handling through the transport please refer to the Safety Data Sheet.
